Cooling Lubricant - Drilling, Tapping, Milling and Turning

• Clean the tank and pipes with Machine and Material Cleaner - Organic Pollution and rinse with a solution of Machine and Material Cleaner - Disinfectant.
• Rinse the tank and pipes with a 1:100 solution of this product until the rinse water is clear.
• Fill the tank with the amount of water required, then add the correct amount of product: 5:100 for working (mild) steel with normal tensile strength and 6:100 to 10:100 for drilling, turning and milling cutters for machining harder metals.
• Regularly check the brix value and the pH of the coolant. The user concentration is 1.9 times the brix reading. The pH must be above 9.0.
• Add additional product if necessary, depending on the readings.

Figure 1. Brix ( ° ) and concentration (v/v%) of Cooling Lubricant – Drilling, Tapping, Milling and Turning .

- - - 5:100 for machining (mild) steel with normal tensile strength .

- - - 6:100 to 10:100 for drilling, turning and milling for machining harder metals .

• Store between 10 – 40 °C.

10 liters = 1 drum of 10 liters
20 liters = 2 drums of 10 liters
30 liters = 1 drum of 30 liters
60 liters = 2 drums of 30 liters
210 liters = 1 barrel of 210 liters

For more packaging options, please email our customer service customer.service@vossenlaboratories.com