HT Grease 2 - General Lubricating Grease High Vibration and Shock Load up to 280 °C - Food Safe Surfaces

New bearings: fill the bearings until the grease is just visible.
Depending on use, after about a week, due to air formation in the bearing housing, lubricate until the pressure has built up.

Old bearings: If possible, lubricate until filled with new grease, then follow procedure for new bearings.

General: reduces the lubrication frequency by a factor of 3 to 5 compared to normal lubrication.

• Good water resistance and corrosion protection.
• Extra emergency running properties due to PTFE.
• Suitable for temperatures from -20°C to 140°C.
• The product is NSF H1 certified for incidental contact with food (reg. no. 125892).
• Meets the requirements set by FDA (USA).

400 grams = cartridges
10 kg = 1 bucket of 10 kg
25 kg = 1 drum of 25 kg
50 kg = 1 drum of 50 kg

For more packaging options, please email our customer service customer.service@vossenlaboratories.com